Saturday, July 11, 2009

How to find a reliable service company or contractor

Trying to find a reliable service company or contractor can be frustrating and time consuming. Whether you have an emergency or want a room addition you want to make sure you hire someone that will do the best job possible. How many stories have you heard of someone waiting hours for the plumber to show up or gave their contractor a down payment and haven't seen them for days. Don't become the next person with a bad story, make sure you hire a reliable company by becoming a member of Angie's List. Thousands of people search the internet for service companies in their area, only to end up with a lousy service experience due to limited information. Angie's List takes the guesswork out of finding good service companies and contractors by providing it's members with thousands of unbiased ratings and reviews of their local service companies. To find out more about Angie's List or to become a member click on the link at the right.

Friday, July 10, 2009

Sewer cleanouts

A Sewer cleanout is a fitting on a sewer lateral that allows access for cleaning and maintenance. Without a sewer cleanout there is no direct access to it and will not be cleaned properly. Sewer cleanouts usually have a 4 inch plastic or brass screw cap on them. Some common locations for sewer cleanouts are at the base of the stack, on the basement floor, behind a toilet or just outside of the house. If you can not find one, you either do not have one or it could be buried in dirt or underneath concrete. If you find that you do not have a sewer cleanout, having one installed could save you money in the long run especially if you have large trees in your yard. Tree roots are a major cause of sewer lateral backups. Once tree roots enter a sewer lateral it will need to be cleaned regularly because the roots will always grow back. To help prevent your sewer from backing up, be careful what you put down your drains or flush down the toilet






Reblog this post [with Zemanta]
A

Sunday, July 5, 2009

Clogged bath tub drain

A rare view of the bathroom plumbingImage by njvack via Flickr

A clogged bathtub drain is another common plumbing problem homeowners face, but these drains should be left for the professionals because of where the trap is located. The P-trap on a bathtub is located underneath the tub which will put it in the joists between the bathroom floor and the ceiling of the level below it, or if the house is built on a slab the trap will be under the concrete. If you try to run a snake yourself you could damage the trap and have water damage to contend with plus having the trap repaired. It will be faster and cheaper in the long run to call a professional sewer and drain cleaning company. See one of my previous posts on selecting a sewer and drain service company. The most common cause of blockage in a clogged bathtub drain is hair. If you can keep the hair from going down the drain you should not have a lot of trouble with clogs. Your local hardware store should have several different types of hair snares or filters that fit on top of the drain.
Reblog this post [with Zemanta]

Friday, July 3, 2009

Parking lot catch basins

Street side storm drain, Dryden Ontario.Image via Wikipedia

If you own or manage a commercial property with a parking lot you will eventually have problems with parking lot catch basins. Catch basins are an opening into the storm drainage system that includes a grate at the parking lot level, an outlet pipe and a sump area at the bottom of the basin. The outlet pipe should be above the sump area to allow debris and heavy sediment to collect in the sump and not enter the outlet pipe. Some catch are equipped with a hooded outlet to prevent trash or other floatable materials from entering the outlet pipe. Parking lot catch basins need to be maintained, if not the debris, sediment and trash will build up over a period of time and not allow the storm water to drain through the outlet pipe causing the parking lot to flood. A flooded parking lot would require a Vac Truck to be hired to vac off water and remove debris from catch basin. These trucks normally run from $175.00 to $225.00 per hour. Typical maintenance for a catch basin is done by simply removing the grate and cleaning out the sump with a shovel or bucket. This should be done at least twice a year.
Reblog this post [with Zemanta]

Thursday, July 2, 2009

Grease trap maintenance for FOG

This post is mostly for the restaurant owners and managers out there. A major cause of sewer blockages across the United States is the accumulation of fats, oil, and grease (FOG) in the sanitary sewers. Many sewer districts across the U. S. have implemented a FOG control program. A major part of that program is grease trap maintenance. Grease traps or grease interceptors are installed outside of the restaurant and are underground with only the lid exposed for maintenance. These grease traps allow for the separation of FOG so it does not enter the sewer system. Grease traps only work when properly maintained, so proper grease trap maintenance is to have it pumped out and cleaned by a licensed grease hauler. Most grease haulers offer discounts on pumping if you sign up for their grease trap maintenance program. Penalties for non compliance of an implemented FOG control program range from fines to having your water shut off. It is extremely cheaper to set up a grease trap maintenance program with a grease hauler then to be in non compliance of a FOG control program.
Reblog this post [with Zemanta]

Sunday, June 28, 2009

Sump pump operation

Checking for proper sump pump operation in your home should be done regularly. The most common type of sump pump installed in homes today are submersible. They are installed in a pit usually in the corner of the basement or crawl space. Sump pumps carry the ground water and surface run off away from the foundation. If water is left to accumulate around the foundation it could be damaged. To check a submersible sump pump operation you manually engage the float to turn the pump on. On a pump with an external float, use a non-conductive household item that is lying around to pull the float up until it turns on, do not reach into the pit. On a pump with an internal float, unplug the double plug, remove the rear plug and plug it directly to the outlet. Once the pump has run for a few minutes check that the water was discharged at least 20 feet from the house. Proper sump pump operation should be checked at least twice a year and when the home is sold
482itkfh96



Reblog this post [with Zemanta]

Saturday, June 27, 2009

Clogged bathroom sink drain

A clogged bathroom sink drain is a common and one of the most frustrating plumbing problems for homeowners. The bathroom sink is probably the most used fixture in the house. From washing your hands to brushing your teeth to shaving, all of these things are done at the bathroom sink. All of these things create residue that go down the drain eventually causing it to be clogged. If you have a clogged bathroom sink drain, most of the time the clog will be in the trap under the sink and can easily be fixed in just minutes. The only tools you will need is channel lock pliers and something to catch the water in. Just loosen the nuts on the trap to allow the water to drain out. Once the water has drained, remove the trap and clean it out. If the trap is damaged you may have to replace it. Reinstall the trap and there you have it, you have just fixed a clogged bathroom sink drain